On paper, almost any active ingredient can go into a gummy. In practice, the glucosamine dose studied in the largest trial on the subject, 1,500 mg per day, requires at least 7.5 g of gummy mass if each gummy is loaded at 20% active. In other words, several pieces a day, before taste, sugar or texture even come into the picture.
When formulating a gummy supplement, the first criterion is neither the flavor nor the shape: it is the daily dose of the active ingredient. A gummy is weighed in grams and only accepts a fraction of its mass as active ingredients, in the range of 5% to a little over 20% depending on their nature. The best candidates are therefore ingredients studied at a few hundred milligrams per day, or less.
Why are gummies and small formats so appealing to brands?
Because consumers are asking for them, in the United States at least. According to Nutrition Business Journal's 2022 Delivery Format report, gummies grew from 10.1% of the US supplement market in 2016 to 21.3% in 2021 (SupplySide Supplement Journal, 2022).
The same report adds a useful nuance. Asked about their preferred format, 27% of consumers name the gummy, ahead of the tablet (25%) and the capsule (20%). But when asked what they actually take, the tablet stays in the lead with 56% of users, versus 39% for the gummy (New Hope Network, 2022). The desire is there; conversion depends on the product.
Mini-capsules and powder sticks follow the same convenience logic, each with its own capacity.
Formulating a gummy supplement: how much active can you really put in?
Less than you might think. A gummy is first and foremost a sweet gel: glucose syrup, sugar or sweeteners, a gelling agent, and a final water content of between 15 and 30% according to a recent review on functional gummies (Tarahi et al., 2023). The active has to fit into what is left, without breaking the gel.
A North American gummy manufacturer interviewed by SupplySide Supplement Journal put the maximum inclusion rate of a vitamin and mineral premix at around 5%, and above 20% for proteins or fibers. Conversely, 0.1% of a very bitter raw material can already be unacceptable. The manufacturer's method: the dose divided by the inclusion rate validated in the lab gives the gummy mass needed per day (SupplySide Supplement Journal, 2016).
Texture sets its own limits too. In a trial of gummies enriched with rice protein, increasing the protein share generally reduced gel firmness, and it was the moderate substitutions that best preserved the structure (Siripan et al., 2026).
Gelatin or pectin: a technical choice that commits your positioning
Gelatin remains the historical gelling agent. It is obtained mainly from porcine, bovine, fish or poultry sources (Vásquez-Senador et al., 2026). Its gel is thermoreversible, with melting and gelling temperatures below body temperature (Boran and Regenstein, 2010). Hence its melt-in-the-mouth texture, and the care it demands in storage and transport in hot weather.
Pectin, extracted mostly from apple pomace and orange peel, gels through two mechanisms: in the presence of calcium for low-methoxyl pectins, or with a solute (sugar) at low pH for high-methoxyl pectins (Thakur et al., 1997). In a gummy, it requires an acidic medium and may need more sugar than gelatin (Tarahi et al., 2023). In return, it withstands heat better once set, but its irreversible setting makes it trickier to handle in production (SupplySide Supplement Journal, 2016).
For a brand, the question goes beyond texture. With gelatin, your gummy is not vegetarian, whatever active you put in it. For an ovo-vegetarian range, we recommend deciding in favor of pectin right from the specification stage, then choosing actives consistent with that positioning. See also our article on vegetarian collagen.
Heat, acidity, moisture: what your active will have to withstand
A gummy is made hot. A US patent covering supplement gummies describes a mix processed between 70 and 100 °C, with sugar dissolution at around 85 to 100 °C (US Patent 12,016,359 B2). For vitamin C, the authors of a 2026 study report rapid degradation during manufacturing (Amalraj et al., 2026).
Acidity is the second constraint. Citric acid and ascorbic acid are common in children's multivitamin gummies, with pH values that can drop below 5.5 (Elbatanony et al., 2026), and a high-methoxyl pectin gel requires an acidic medium anyway. Your active must remain stable under these conditions throughout the product's shelf life.
Then there is water. The patent cited above targets a water activity of 0.73 or less. Sugar immobilizes free water in the gel, polyols can limit moisture migration, and both syneresis and sucrose crystallization degrade texture over storage (Vásquez-Senador et al., 2026). Only stability tests on the finished gummy will tell you how your active behaves in it.
Sugar, sweeteners, taste: the trade-offs that show on the label
Reducing sugar is tempting, but sugar also acts as a natural preservative: a sugar-free gummy may require other preservatives or suitable packaging (Tarahi et al., 2023). Polyols have their own labeling rule in Europe: above 10% added polyols, the statement "excessive consumption may produce laxative effects" is mandatory (Regulation (EU) No 1169/2011, Annex III).
Taste, finally, often settles the debate: leaf extracts can bring bitterness and astringency, which microencapsulation helps to mask (Vásquez-Senador et al., 2026). Rule of thumb: the lower the dose of an active, the less its taste and color weigh in the recipe.
Dose per unit, units per day: where gummies are won or lost
Delivering the same dose from one piece to the next is far from automatic. In 2023, an analysis of 25 melatonin gummies sold in the United States measured between 74% and 347% of the declared amount, and only 3 products were within plus or minus 10% of the label (Cohen et al., 2023). Mix homogeneity, cooking losses, overage to compensate: all of this is settled upstream, with your contract manufacturer.
The number of pieces per day matters just as much. Each additional piece adds sugar or polyols, cost, and a daily habit to sustain over time. Frankly, beyond two gummies a day, we consider the formula has a dose problem rather than a format problem.
Which actives fit in 1 to 2 gummies?
The table applies the calculation method above to clinical trial doses, with two inclusion rate bounds, 5% and 20%. For reference, a pediatric gummy developed in the lab weighed 1.4 g (Kean et al., 2023); a supplement gummy generally weighs a few grams. On the capsule side, a size 00 holds 570 to 1,140 mg of powder depending on its density, and a size 1 holds 300 to 600 mg (technical sheet from a capsule manufacturer).
| Active | Daily dose studied | Gummy mass needed (20% / 5% active) | Fits in 1 to 2 gummies? | Capsule alternative |
|---|---|---|---|---|
| Glucosamine | 1,500 mg (Clegg et al., 2006) | 7.5 g / 30 g | No | 2 to 3 size 00 capsules |
| Chondroitin | 1,200 mg (Clegg et al., 2006) | 6 g / 24 g | No | 2 to 3 size 00 capsules |
| Hydrolyzed collagen | 10 g (Clark et al., 2008) | 50 g / 200 g | No | Unrealistic: powder or stick |
| MSM | 6 g (Kim et al., 2006) | 30 g / 120 g | No | Unrealistic: powder or stick |
| Undenatured type II collagen | 40 mg (Lugo et al., 2016) | 0.2 g / 0.8 g | Yes | 1 small capsule |
| Eggshell membrane (Reggenerate®: 300 mg recommended) | 300 mg (Kiers and Bult, 2020) | 1.5 g / 6 g | Yes on the dose calculation, 1 to 2 pieces depending on the validated rate | 1 size 1 capsule |
The reading is clear-cut. Actives dosed in grams, hydrolyzed collagen and MSM first among them, are powder and stick ingredients, and they do very well there. Glucosamine and chondroitin find their place in tablets or multiple capsules. For a gummy at one or two pieces per day, you should target actives that are effective at a low dose. To compare their clinical evidence, see our comparison of joint supplement ingredients.
Where does eggshell membrane fit in a gummy project?
Eggshell membrane belongs to the family of low-dose actives: randomized trials have tested it at between 300 and 500 mg per day, and a 2024 meta-analysis covering seven trials concludes there is an improvement in total WOMAC score in people with knee osteoarthritis (García-Muñoz et al., 2024). These trials concern other eggshell membranes, not Reggenerate®. Its matrix naturally contains collagen, elastin, hyaluronic acid, glucosamine and chondroitin.
At Circul'Egg, a company based in Janzé, Brittany, we chose to keep the membrane in its native form. Reggenerate®, native eggshell membrane, is non-hydrolyzed, obtained through a 100% mechanical, solvent-free process from upcycled eggshells, and recommended at 300 mg per day. Reggenerate® is offered for gummies as well as for capsules, tablets, powders and bars. Let's be honest: as with any active, how it behaves in your gummy mass (texture, taste, stability) is validated on a pilot run with your contract manufacturer, and that is the first thing we recommend planning. The only allergen to declare is egg, which makes it compatible with a pectin-based ovo-vegetarian formula.
For the on-pack message, eggshell membrane has no authorized health claim in Europe. Brands pair it with nutrients that carry an authorized claim, such as vitamin C (normal collagen formation for the normal function of cartilage) or manganese (normal formation of connective tissue). Good news for a gummy: their nutrient reference values are 80 mg for vitamin C and 2 mg for manganese (Regulation (EU) No 1169/2011, Annex XIII). Always check the exact wording in the EU Register of health claims. Our eggshell membrane guide for formulators details its composition, and our ready-to-market range is designed for brands that want to launch a product faster.
Frequently asked questions
Which gummy ingredient should you choose for a joint formula?
An ingredient whose studied daily dose fits in one or two pieces, such as undenatured type II collagen (40 mg) or eggshell membrane (300 to 500 mg). Glucosamine, hydrolyzed collagen and MSM, studied at more than one gram per day, are better served by tablets, powders or sticks.
Gelatin or pectin for a supplement gummy?
Gelatin offers a melt-in-the-mouth texture but it is of animal origin and its gel melts below body temperature. Pectin is plant-based and withstands heat better, but it requires an acidic medium and tighter control in production. If your range targets vegetarians, pectin is the obvious choice.
Can you put several actives in the same gummy?
Yes, provided their combined doses stay within the inclusion rate validated for your gummy mass. Add up the doses, divide by that rate, and you get the gummy mass needed per day. A matrix that delivers several actives in a single ingredient then saves space.